Features:

• Two XT-33 Five-button remote transmitter with S.A.W. technology
• Optional XT-11 One-button ultra Mini remote for remote start. Mini remote can be added to factory remote key chain. S.A.W technology
• New Negative and Positive (- & +) Door Lock Outputs
• New C3 compatible with Data Link port 
• New 2-Way Serial-Data port for iData modules
• New Window-mount super heterodyne SAW receiver. RX-300A
• New Ultra small unit size with Micro K relays
• New Dash mounted LED and Valet switch
• New GM starter timing for no start wire vehicles
• Relays on-board: Parking lights, Starter, Accessory, Ignition #1, Ignition #2
• Output for Ignition #3
• Temporary Stop Feature (short stops with the engine running/no key)
• 200ma ground programmable output for horn or factory security rearm
• Programmable one pulse or three pulse start for adding-on to an existing aftermarket or factory security / keyless entry system (includes programming for shock sensor bypass)
• NEW Programmable factory keyless door locking before & after start
• New Programmable Ignition control door locks (on / off)
• New Programmable Safety Start - Two or One push on the start button
• Programmable for gasoline or diesel engine
• Programmable for remote start: voltage type, RPM/Tachometer learning type or timer checking type
• Programmable Low or High check level
• Programmable run time: 5, 10, 20, or 30 minutes (default=20 minutes)
• Programmable Parking Light output: constant or flashing for visual start confirmation
• NOTE: SOME CARS REQUIRE OTHER OPTIONAL INTERFACE  ITEMS FOR OEM VATS NOT INCLUDED FOR AUTO START AND DOOR LOCK AND OTHER FEATURES LISTED.