WELCOME TO THE NEW 2012

POUST USA SITE

POUST USA HOME

HOT ROD PAGES

IECO 190 HP 4 CYL / POUSTUSA CHEVY VEGA PAGE

NEW WEBER CARB TUNING PAGES

 RADIO SERVICE RADIO CONVERSION AND MORE

HOT CAR PARTS LINKS

SALVAGE YARD LINKS STATE BY STATE LISTINGS

AUTO AC HELP PAGES

EQUIPMENT AND SMALL ENGINE PAGES WITH LINKS HONDA PAGES TOO AND HOW TO!!

CLICK BELOW FOR THE COOL UNIT CONVERTER SITE

DigitalDutch.com

WIX filters, WIX oil filters, WIX air filters, WIX fuel filters, WIX Heavy Duty Oil Filters

Genie of Fairview Door Company - Garage door openers, parts and service since 1964

ball bearings

AUTO PARTS LINKS

POWERSUPPLY

Home
Up

 

CROWER VX-16 FLAT TAPPET IECO STAGE 4 CAM 140CI OHV 2300 CC.

CHEVY VEGA 1971-1974 292 DEG DURATION .470 LIFT

DIRECT FROM JERRY @ CROWER CAMS "ALL OUR CAMS HAVE THE 4 DEG ADVANCE GROUND RIGHT IN TO THE CAM SO YOU CAN INSTALL THEM ON THE FACTORY MARKS AND THEY ARE RIGHT ON THE MONEY!!"

WO# 07302 IECO STAGE 4 CAM

 

 
Part Number/Work Order Number 07302
Engine Application VEGA 4 CYLINDER
Grind Number VX-16 "REV-PLUS"

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 292º Lift: .470 Clearance Hot: .016
EXHAUST: Duration: 292º Lift: .470 Clearance Hot: .030

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # 68304 Single X Dual Triple
Approximate spring pressure: valve closed: 90 LBS.
valve open: 220 LBS.

 
13.0
BTDC		 5.0
ATDC
ABDC
45.0		 53.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 13.0 BTDC
Closes: 45.0 ABDC
EXHAUST Opens: 53.0 BBDC
Closes: 5.0 ATDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 238
Exhaust: 238
LOBE LIFT Intake: .466
Exhaust: .466

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:





 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 
© 2002 Crower Cams & Equipment Co., Inc.
Phone: 619-422-1191 · Fax: 619-422-9067

 

IECO VE190#1 STAGE 3 VX-12 CAM WO# 07300

 

 
Part Number/Work Order Number 07300
Engine Application VEGA 4 CYL.
Grind Number VX-12 REV-PLUS

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 274º Lift: .450 Clearance Hot: .016
EXHAUST: Duration: 274º Lift: .450 Clearance Hot: .030

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
8.0
BTDC		 0.0
ATDC
ABDC
40.0		 48.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 8.0 BTDC
Closes: 40.0 ABDC
EXHAUST Opens: 48.0 BBDC
Closes: 0.0 ATDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 228
Exhaust: 228
LOBE LIFT Intake: .447
Exhaust: .447

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:





 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 
© 2002 Crower Cams & Equipment Co., Inc.
Phone: 619-422-1191 · Fax: 619-422-9067

MORE 140 VEGA CAM GRINDS:




 
Part Number/Work Order Number 07310
Engine Application VEGA 4 CYL.
Grind Number 260-FDP

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 260º Lift: .460 Clearance Hot: .015
EXHAUST: Duration: 268º Lift: .477 Clearance Hot: .015

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
12.0
BTDC		 7.0
ATDC
ABDC
44.0		 55.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 12.0 BTDC
Closes: 44.0 ABDC
EXHAUST Opens: 55.0 BBDC
Closes: 7.0 ATDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 236
Exhaust: 242
LOBE LIFT Intake: .460
Exhaust: .475

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:





 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 



 
Part Number/Work Order Number 07311
Engine Application CHEV VEGA
Grind Number

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 274º Lift: .485 Clearance Hot: .015
EXHAUST: Duration: 282º Lift: .508 Clearance Hot: .015

 
The specifications listed above are based on a rockerarm ratio of 1.00 IN
1.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
18.0
BTDC		 14.0
ATDC
ABDC
50.0		 62.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 18.0 BTDC
Closes: 50.0 ABDC
EXHAUST Opens: 62.0 BBDC
Closes: 14.0 ATDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 248
Exhaust: 256
LOBE LIFT Intake: .485
Exhaust: .508

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:

B-1112 EXHAUST



 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 


 
Part Number/Work Order Number 07315
Engine Application VEGA 4 CYL.
Grind Number 264-HDP

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 264º Lift: .000 Clearance Hot: .000
EXHAUST: Duration: 272º Lift: .000 Clearance Hot: .000

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
-2.0
ATDC		 -6.0
BTDC
ABDC
34.0		 46.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: -2.0 ATDC
Closes: 34.0 ABDC
EXHAUST Opens: 46.0 BBDC
Closes: -6.0 BTDC

LOBE SEPERATION    112º

 
Duration at .050" Intake: 212
Exhaust: 220
LOBE LIFT Intake: .399
Exhaust: .417

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 108º

NOTES:
GARAGE SALE




 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 


 
Part Number/Work Order Number 07316
Engine Application VEGA 4 CYL.
Grind Number 272-HDP

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 272º Lift: .419 Clearance Hot: .000
EXHAUST: Duration: 280º Lift: .435 Clearance Hot: .000

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
4.0
BTDC		 -1.0
BTDC
ABDC
36.0		 47.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 4.0 BTDC
Closes: 36.0 ABDC
EXHAUST Opens: 47.0 BBDC
Closes: -1.0 BTDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 220
Exhaust: 226
LOBE LIFT Intake: .419
Exhaust: .435

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:





 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 


 
Part Number/Work Order Number 07317
Engine Application VEGA 4 CYL.
Grind Number 280HDP

ADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 280º Lift: .000 Clearance Hot: .000
EXHAUST: Duration: 280º Lift: .000 Clearance Hot: .000

 
The specifications listed above are based on a rockerarm ratio of .00 IN
.00 EX

RECOMMENDED VALVE SPRING INFORMATION:
Part # STOCK Single Dual Triple
Approximate spring pressure: valve closed: 0 LBS.
valve open: 0 LBS.

 
8.0
BTDC		 0.0
ATDC
ABDC
40.0		 48.0
BBDC
The information below is for degreeing cam only. Correct only at .050" tappet lift.
INTAKE Opens: 8.0 BTDC
Closes: 40.0 ABDC
EXHAUST Opens: 48.0 BBDC
Closes: 0.0 ATDC

LOBE SEPERATION    110º

 
Duration at .050" Intake: 228
Exhaust: 228
LOBE LIFT Intake: .436
Exhaust: .436

If using "Lobe Center" method of degreeing, cam should be installed on an intake centerline of: 106º

NOTES:

GARAGE SALE



 

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty. Refer to the "Important Camshaft and Lift Information" booklet included with each new Crower camshaft to avoid any break-in problems.

 

COMP CAMS

http://www.compcams.com/technical/CamCores.asp#flattappet

CORE

89-000-5 CHEVROLET Vega L4 140ci (1971-77)

http://www.summitracing.com/parts/CCA-89-000-5/  SPECIAL ORDER FOR THE 140

CAM CRAFT

Camcraft Cams • 54 Atrium Trail, Arden, NC, 28704 • charles@camcraftcams.com
Toll Free (800) 426-2261• (828) 681-5183 • Fax (828) 681-5185

http://www.camcraft-cams.com/index.php?page=general-moters

140 2.5L OHC-4 1971-77 VEGA, MONZA
REGROUND CAM   1264 (71-75) MECH NEW CAM ______ LIFTER MECH  _____
1265 (76-79) HYD                        CHT-110C HYD 
 

 

 

 

 

 

 

 

 

 

 

 

 


 

EDDYVILLE IOWA USA

EDDYVILLE RACEWAY

Contact Info: Gerald Kramer - Manager

Track Address: Eddyville Raceway Park 3260 Merino Avenue Oskaloosa, Iowa. 52577

Mailing Address: Eddyville Raceway Park 2462 Highway 163 Pella, Iowa 50219

Track Phone - 641.969.5596 Gerald Phone - 641.780.3534
manager@eddyvilleraceway.com

NHRA

EVERYONE IS WATCHING GAS PRICES CLICK HERE FOR GAS BUDDY A COOL PLACE TO SEE THE LOWEST PRICES FOR YOUR TRIP.

CLICK HERE FOR KENT-MOORE TOOLS AND MORE FOR LESS

THE ONE STOP TOOLS PARTS PLACE!!

http://www.ngkwholesale.com/ SPARK PLUGS AND MORE FOR A GREAT PRICE

WIX FILTERS AND MORE

http://www.equipmentpartssource.com/

ARE YOU READY FOR THE NEXT EVENT??? CLICK HERE FOR A LIST AND PLANNING INFO!!

[Most Recent Quotes from www.kitco.com]

IOWAGOLD MEMORIAL PAGES

OUR SITES ARE DEDICATED TO THE MEMORY OF SEVERAL LOST IN THE TRAVELS OF LIFE SEE OUR PAGES FOR MORE INFO CLICK HERE

CLICK HERE FOR THE NEW WWW.KLIMACO.COM SITE

CLICK HERE FOR THE PARANORMAL AND MORE WWW.KLIMACO.NET SITE

CLICK HERE FOR THE WWW.KLIMACO.ORG HOT LINKS EXPRESS

CLICK HERE FOR WWW.IOWAGOLD.COM FREE GOLD INFO

CLICK HERE FOR WWW.IOWAGOLD.NET

CLICK HERE FOR WWW.IOWAGOLD.ORG

CLICK HERE FOR POUST ENGINEERING